Synaps THD-2850 - Manual (Page 7)

7
THD-2850/2860/2880
Press EXIT key to pop up the dialogue “Are you sure
to save?”. Select Yes button and press OK key to
save, or select NO button and press OK key to exit
without saving.
4.1.2 Radio Channel List
The same operation as 1.1 TV Channel List, here we
don’t explain any more.
4.1.3 Delete All
Move cursor to the Delete All item, and press OK Key
to pop up the dialogue “Warning! Do you really want
to delete all channel?”.
Press EXIT key to pop up the dialogue “Are you sure
to save?”. Select Yes button and press OK key to
save, or select NO button and press OK key to exit
without saving.
4.2 Installation
1. Press PR+, PR- keys to move the cursor up or
down.
2. Press EXIT key or key to move the focus to
the left menu.
4.2.1 AutoScan
When you enter Auto Scan menu, the screen will
display as below.
In FTA Only, press [Left/Right] key to choose Yes or
No.
Move the highlight on the search option, and press
[OK] key to start scanning.
Press [EXIT] key to exit this menu.
4.2.2 Channel Scan
When you enter Channel Scan, the screen will
display as beside.
There are two scan modes for you. You can choose
to scan by channel or by frequency.
When scan band is UHF and region is “China”, the
range of Ch Number is from 13 to 61. When scan
band is VHF and region is “China”, the range of Ch
Number is from 1 to 12. (It’s according to region.)
When you complete your confi guration, move
highlight to search option, and press [OK] key to start
scanning.
Press [EXIT] key to exit the scanning and save the
current parameters.
4.2.3 Aerial Adjustment
When you enter Antenna feeding, the screen will
display as beside.
In CH No. submenu, press [Left/Right] key to choose
the channel.
In Tuner Power submenu, press [Left/Right] key to
choose Off and On.