Using the remote control unit, Precautions for use, Battery installation – Teac NP-H750 User Manual

Page 19: Battery replacement

Advertising
background image

19

19

ENGLISH

Using the remote control unit

Precautions for use

V

Misuse of batteries could cause them to rupture

or leak leading to fire, injury or the staining of
items nearby. Please carefully read and observe
the precautions on page 3.

p

Point the remote control unit at the main unit’s remote
sensor from within 5 meters (16 feet) of it. Make sure
that there are no obstructions between the remote
control and the main unit.

p

If direct sunlight or strong artificial illumination shines
on the remote sensor, the remote control might not
function. If that is the case, move this unit to another
location.

p

If the remote control unit is operated near other devices
that generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it
might operate incorrectly. The other devices might also
operate incorrectly.

Battery installation

Remove the cover from the back of the remote control and
insert two AAA batteries with their ¥/^ ends oriented in
the case as shown. Replace the cover.

Battery replacement

If the operation range of the remote control decreases, the
batteries have become exhausted. In this case, replace the
batteries with new ones.
For detailed information about the collection of batteries,
please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.

Advertising