Teac HS-4000 - Manual (Page 10)

10
TASCAM HS-4000
1 − Introduction
Any data, including, but not limited to information, described
herein are intended only as illustrations of such data and/or
information and not as the specifications for such data and/
or information. TEAC Corporation disclaims any warranty that
any use of such data and/or information shall be free from
infringement of any third party’s intellectual property rights
or other proprietary rights, and further, assumes no liability
of whatsoever nature in the event of any such infringement,
or arising from or connected with or related to the use of
such data and/or information.
This product is designed to help you record and reproduce
sound works to which you own the copyright, or where
you have obtained permission from the copyright holder or
the rightful licensor. Unless you own the copyright, or have
obtained the appropriate permission from the copyright
holder or the rightful licensor, your unauthorized recording,
reproduction or distribution thereof may result in severe
criminal penalties under copyright laws and international
copyright treaties. If you are uncertain about your rights,
contact your legal advisor. Under no circumstances will TEAC
Corporation be responsible for the consequences of any
illegal copying performed using the recorder.
Precautions for placement and use
• The guaranteed operating temperature range of this
product is 5º - 35º C (41º- 95º F).
• Do not install in the following types of places. Doing
so could degrade the sound quality and/or cause
malfunctions.
• Places with significant vibrations or that are otherwise
unstable
• Near windows or other places exposed to direct sunlight
• Near heaters or other extremely hot places
• Extremely cold places
• Places with bad ventilation or high humidity
• Make sure that the unit is mounted in a level position for
correct operation.
• In order to promote the emission of heat, do not place
anything on top of this product.
• Do not place this product on top of a powered amplifier or
other equipment that emits heat.
Beware of condensation
If the unit is moved from a cold to a warm place, or used
immediately after a cold room has been heated or otherwise
exposed to a sudden temperature change, condensation could
occur. Should this happen, leave the unit for one or two hours
before turning the unit on.
Cleaning the unit
Wipe the unit with a soft dry cloth to clean it. Do not use any
benzine, paint thinner, alcohol or other chemical agents. Doing
so could damage the surface of the unit or cause fading.
Cleaning the display
Slightly wipe the display with a soft dry cloth that does not shed
dust (e.g. a cleaning cloth). Avoid wiping with a stiff cloth or
rubbing with force. Doing so could damage the surface of the
LCD. Do not use benzene, thinner, manicure remover, alcohol or
similar substances.
About CF cards
Precautions for use
CompactFlash cards are precision devices. To prevent damage to
the card or the slot, please observe the following cautions.
• Do not leave a CF card in an extremely hot or cold location.
• Do not leave a CF card in an extremely damp location.
• Do not allow a CF card to become wet.
• Do not place any object on top of a CF card, or twist or
bend it.
• Do not subject a CF card to strong impact.
• Do not insert or remove a CF card during recording,
playback, data transfer or other operations that access a
card.
Media that has been confirmed for use with
this unit
This unit uses CF cards for recording and playback.
We recommend using genuine TASCAM CF cards, but use of
other CF cards that are available commercially is possible.
Microdrives cannot be used with this unit.
The capacities and performance of your HS-4000 will vary based
on the speed and abilities of the Compact Flash (CF) media used.
Older and some cheaper Compact Flash (CF) cards use slower
memory components and little internal buffering which results
in poor recording performance. Newer CF cards, particularly
those made for high-precision DSLR cameras, not only perform
reading and writing faster, but also come in larger storage size.
A list of CF cards that we have confirmed to work with this unit is
provided on our website (http://tascam.com/).
If a CF card is used that has not been confirmed, this unit might
not operate correctly.