Tecfluid MX4 For FLOMID Series - Manual (Page 43)

43
12 MAINTENANCE
No special maintenance is required.
For cleaning, a humid cloth can be used, and if necessary with a little neutral soap.
Solvents or other aggressive liquids which could damage the housing material should not
be used.
12.1 Fuse
In the event that the fuse blows, this should be replaced with a slow blow “T” fuse, size
Ø5 x 20 mm and value 250 mA.
11 STARTING CURRENT
It may happen that the chosen power supply can not provide the required current for the
equipment to operate properly. In this case an information message will appear indicating
this situation.
DEFAULT SCREEN
11
12