Tecfluid MX4 For FLOMID Series - Manual (Page 51)

51
14
Flow rate indication
Nº of digits: 5 (up to 2 decimals configurable)**
Digit size: 11 mm
** When the available digits are full and the integers overflow a decimal is automatically
lost.
Liquid velocity indication
Nº of digits: 5 (2 decimals)
Digit size: 11 mm
General characteristics
Sensor materials:
External: FLOMID-0FX: Stainless Steel
FLOMID-2FX, 4FX (DN
≤ 80): Aluminium and stainless steel (flanges in
coated steel)
FLOMID-2FX, 4FX (DN > 80): Coated steel
FLOMID-1FX, 3FX, 5FX, 7FX: Stainless Steel
Internal: FLOMID-0FX: PP, PVDF
FLOMID-2FX, 4FX: PTFE, Ebonite
FLOMID-1FX, 3FX, 5FX, 7FX: PTFE
Electrodes: Hastelloy, stainless steel, titanium, zirconium, tantalum
MX4 converter material: coated Aluminium
Ingress protection:
FLOMID-0FX: IP65
FLOMID-1FX, 2FX, 3FX, 4FX: 5FX, 6FX, 7FX, 9FX: IP67
MX4 converter: IP67
Maximum cable length (remote version) : 150 m
Communication protocols (optional)
Modbus RTU
HART
Detailed information on these protocols can be found in the R-IT-MX4COM instructions
manual, that can be downloaded from Tecfluid S.A. website.
Conforms to Low voltage Directive 2006/95/CE
Conforms to Electromagnetic compatibility Directive 2004/108/CE
Conforms to Waste Electrical and Electronic Equipment Directive 2002/96/CE
TECHNICAL CHARACTERISTICS
HART® are registered trademarks of the HART Communication Foundation