Teletronics TT 2400 - Manual (Page 47)

Device Control
This section has functions that will allow the TT5800/TT2400 to Reboot and Reset the system configuration to factory
default.
Firmware Upgrade
This section allows the TT5800/TT2400 firmware to be upgraded or changed directly from the web interface. Click on
the Browse bottom to select a file from the host machine.
Register
The TT5800/TT2400 has implemented a hardware modification authorization process to prevent fraudulent hardware
from other manufacturers. This will require any hardware change on the radio card used on the TT5800/TT2400 to
input a serial code generated based on each unique MAC address. Please contact Teletronics Support to a pickup a
valid serial number to deactivate the pre-registration protection after a radio card swap. If no valid serial code has been
input into the unit, features such as SSID and Wireless Channel will be locked down.