Venstar T7900 - Manual (Page 50)

42
Main Menu Buttons -
Settings
The right column of the ADR configuration page is where the
occupant adjusts the operational parameters for ADR. The utility
may send up to 3 types of ADR signals to Skyport. These are:
1) Pricing for the cost of energy, 2) An Offset to the occupants’
comfort setpoints, and 3) a signal to enforce discrete or Static
setpoints.
The Maximum Cooling Setpoint and Minimum Heating Setpoints
for ADR events are adjusted here.
The Static Settings are applied when the utility sends a signal
to allow the occupant to enforce their own discrete temperature
settings during an ADR event.
The Offset Settings allow the utility to modify the Cool or Heat
setpoints by the value set here during an ADR event.
A Price Trigger setting allows the occupant to set the maximum
cost of energy threshold. When this threshold is exceeded
the Price dependent action is enforced. This Price Trigger and
Dependent action is enforced independent of an ADR event, as
long as the utility sends ‘real-time’ pricing.