Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 40)

3-18 W A N s u i t e 5 6 5 0
15-Minute and 1-Day Intervals Screens
Also included on the Span Endpoint Performance screen are options to view
the span endpoint performance summaries for 15-minute intervals and for 1-
day intervals. These screens display only a summary of the errors (ES, SES,
CRC, LOSWS, UAS) that have occurred on the span during the interval
selected.
The 1-Day Intervals screen also includes the status of monitored seconds
(MoniSec), which is defined as the amount of time in a one-day interval over
which the monitoring information is actually counted. This value will be the
same as the interval duration except in situations where, for any reason,
performance monitoring data could not be collected.
The 15-Minute Intervals table provides one row for each endpoint
performance data collection 15-minute interval. The 1-Day Intervals screen
provides one row for each endpoint performance data collection 24-hour
interval.
G.703 Screen
The G.703 Configuration screen (Figure 3.15) lets you view and make
changes to the G.703 interface's configuration as described below. In addition,
this screen provides a table that displays the error status values for the G.703
interface.
Figure 3.15 G.703 Screen
L in e C o d in g Sets the G.703 port line coding.
Values: HDB3, AMI
Default: HDB3