Wavetronix SmartSensor HD (101-0415) - User Guide - Manual (Page 39)

38 CHAPTER 4 • COMMUNICATION
Figure 4.1 – SSMHD Main Screen
To interact with and configure the sensor in SmartSensor Manager HD, connect to the sen-
sor through one of the following three types of connections:
˽ Serial connection – Made using RS-232 or RS-485 communication.
˽ Internet connection – Made using an IP address and a serial to Ethernet converter.
˽ Virtual connection – Can be made for convenience in learning and demonstrating
SSMHD functionality.
Serial Connection
1 Click on the Serial icon
(see Figure 4.2).
2 Set Port and Speed to the desired settings. It is recommended that the speed be set to
9600 bps.
3 Click the Connect button.
Figure 4.2 – Serial Connection