Extron electronic Low Profile Floor-Mount Raceway System for A/V Connectivity AVTrac - Manual (Page 17)

AVTrac • Installation 15
5-4 Glue or tape the carpet to the floor and side ramps.
Refit carpet
5-5 Using the provided template, trim the wall
baseboard to fit snugly around the track. Attach the
baseboard to the wall.
Use template to cut base board
5-6 For model # 42-122-24A, attach the provided rubber
strip to the cover track raceway using double-sided
adhesive tape (provided).
For model # 42-121-24A, cut a strip of the finished
carpeting and glue it to the cover track raceway.
Attach carpet tile to track raceway
Reattach base board to wall
N Do not use the supplied tape to attach the
carpet to the ramp. The tape is intended
only for the attaching the rubber inlay strip
to the cover track.