Welltech WellRec 5600 V.1.5 - Manual (Page 6)

Welltech Computer Co., Ltd.
WellRec 5600 - 6 -
Chapter 2 WellRec 5600 Quick Start
After connected Ethernet cables into the WellRec5600 Service Interface,
turned on the power. The first step is to logon the system and set up the IP
address.
Before you can use the browser to config WellRec5600, you need to
install Java Plug-in. Please confirm your JRE version is 1.4.2(preferred &
tested), if your PC has already installed Java.
You also need to set newer versions of stored pages in Internet Explorer
to “Every visit to the page.” Click Tool > Internet Option > General > Setting.
After success, restart your browser to take effect.
Logon WellRec 5600
Step1 : Start IE6.0 (or later version) to navigate WellRec 5600 web
management system by typing the default URL is
http://192.168.111.161:10087 . The screen will display User ID and
Password as figure 2.1-1.
Figure 2.1-1
☺Note: The default network IP address is:
Service Interface: 192.168.111.161/ 255.255.0.0/ 192.168.111.254
Management Interface: 192.168.111.151/ 255.255.0.0
Make sure your PC had same network IP address setting (e.g.
192.168.111.33/ 255.255.255.0) Otherwise, you will unable to connect to
WellRec 5600.