Westermo PMI-110-F2G - Manual (Page 40)

The default IP address of MRI‐128‐F4G Managed Switch is assigned from MAC
address, for example fe80:0:0:0:207:7cff:fee6:00, and the Leading zeroes in a
group may be omitted. Thus, the example address may be written as:
fe80::207:7cff:fe60:0.
IPv6 Address field: typing new IPv6 address in this field.
Prefix: the size of subnet or netwok, and it equivalent to the subnetmask, but
written in different. The default subnet mask length is 64bits, and writen in
decimal value ‐ 64.
Add: after add new IPv6 address and prefix, don’t forget click icon ‐“Add” to
apply new address to system.
Remove: select existed IPv6 address and click icon ‐“Remove” to delete IP
address.
Reload: refresh and reload IPv6 address listing.
IPv6 Neighbor Table: shows the IPv6 address of neighbor, connected interface,
MAC address of remote IPv6 device, and current state of neighbor device.
The system will update IPv6 Neighbor Table automatically, and user also can click
the icon “Reload” to refresh the table.
36