Westermo PMI-110-F2G - Manual (Page 91)

Note: Currently PMI6710G only support max 256 groups VLAN.
Static VLAN Configuration
You can see the created VLANs and specify the egress (outgoing) port rule to be
Untagged or Tagged here.
Static VLAN Configuration table. You can see that new VLAN 3 is created. VLAN name
is test. Egress rules of the ports are not configured now
.
Configure Egress rule of the ports.
‐‐ : Not available
U: Untag: Indicates that egress/outgoing frames are not VLAN tagged.
T : Tag: Indicates that egress/outgoing frames are to be VLAN tagged.
Steps to configure Egress rules: Select the VLAN ID. Entry of the selected VLAN turns
to light blue. Assign Egress rule of the ports to U or T. Press Apply to apply the
87