Westermo RM-80 - Manual (Page 7)

7 6193-4201
There is limit of two Routers within the same radio network. There is no limit to the
number of Bridges in the same network – although there is a limit of 255 Client units
linked to any one Access Point.
1.2 Getting Started Quickly
Most applications for the RM-80 require little configuration. The RM-80 has many sophis-
ticated features, however if you don’t require these features, this section will allow you to
configure the units quickly.
First, read Section 2, “Installation”. The RM-80 requires an antenna and a power supply.
… Power the RM-80 and make an Ethernet connection to your PC (for further informa-
tion on how to do this, refer to section 3.3)
… Set the RM-80 address settings as per section 3.4
… Save the configuration – the RM-80 is now ready to use.
Before installing the RM-80, bench test the system. It is a lot easier to locate problems
when the equipment is all together.
There are other configuration setting which may or may not improve the operation of
the system. For detail on these settings, refer to section 3.
6XXZhhEd^ci
7g^Y\Z
A6C6
8a^Zci
7g^Y\Z
&.'#&+-#%#()
A6C7
&+.#'*)#&%.#)%
&.'#&+-#%#()
&.'#&+-#%#,)
8a^Zci
GdjiZg
8a^Zci
GdjiZg
A6C8
&+.#'*)#&%'#&,
&.'#&+-#%#,(
&.'#&+-#%#,'
&.'#&+-#%#,'