Westermo TF-300 - Manual (Page 13)

13 6606-2201
Sn=x Ð Write to S-register
This command write a value x to specified S-register n. See S-register section for specifi-
cation of S-registers. Observe that a value x out of range will generate an error.
%Sn Ð Answerback
This command enables or disables the answerback function. Also observe the
stored/expected answerback strings with &Zn command.
%S0 Disable answerback (default).
%S2 Enable answerback.
Vn Ð Result Code Form
This command selects the short or long-form for the resultcodes.
V0 Enables short-form (terse) result codes. Line feed is not issued before a short-
form result code.
V1 Enables long-form (verbose) result codes (default).
&V Ð Display Current Configuration and Stored Profile
The modem reports the current and the stored profile, the stored number for data / RTS
connection and stored / expected answerback.
Example:
ACTIVE PROFILE:
E1 Q0 V1 X1 &B0 &C1 &E0 &K0 %S0
S02:043 S03:013 S04:010 S30:100 S32:017 S33:019 S98:010 S99:000
STORED PROFILE:
E1 Q0 V1 X1 &B0 &C0 &E0 &K3 %S0
S02:043 S03:013 S04:010 S30:100 S32:049 S33:048 S98:050 S99:100
STORED NUMBER FOR DATA/RTS CONTROL:
123456
STORED ANSWERBACK:
WESTERMO
EXPECTED ANSWERBACK:
WESTERMO
&W Ð Store Current Configuration
This command saves the current (active) configuration (profile), including S-registers. The
stored setting is restored by using the Z command.