Equator BCR 500 - Manual (Page 12)

12
Ø Spanner Faucet Wrench
Spanner faucet wrench provided for either removing or tightening
connection
Ø Plastic Faucet Lever
Attach the black plastic lever (pull handle) provided on the top of the
faucet tightening it by hand clockwise until the end, holding in the silver
snug underneath so it does not move.
If there is still a small drip from the faucet, you may have tightened the
plastic lever too much and may need to unscrew silver snug counter-
clockwise (as shown) one turn. That should correct the problem if exists.