AIRLESSCO SP200 - Manual (Page 32)

Technical Data
32 3A0994E
SP300, Mustang 3100
Electrical Power Requirements . . . . . . . . . . . . . . . . . . . 120 Vac, 60 Hz, 15A, 1 phase
Working Pressure Range . . . . . . . . . . . . . . . . . . . . . . . 0 - 3000 psi (0-21 MPa, 0-207 bar)
Generator required . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500W minimum
Electric Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8A (permanent magnet DC)
Operating horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4
Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 AWG, 3-wire, 6 ft (1.8m)
Fluid inlet fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 NPSM external thread
Inlet screen (on suction tube) . . . . . . . . . . . . . . . . . . . . 35 mesh (450 micron)
Maximum Delivery (with tip) . . . . . . . . . . . . . . . . . . . . . 0.34 gpm (1.29 lpm)
Paint Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 in. x 50 ft. (6.4 mm x 15 m)
Maximum tip hole size . . . . . . . . . . . . . . . . . . . . . . . . . . 0.017 in. (0.43 mm)
Weight, sprayer only . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 lb (20 kg)
Weight, sprayer, hose and gun . . . . . . . . . . . . . . . . . . . 46 lb (21 kg)
Dimensions: Upright
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.79 in. (60.32 cm)
Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.27 in. (44.45 cm)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.99 in. (92.71 cm)
Dimensions: Folded
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.79 in. (59.05 cm)
Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.27 in. (44.45 cm)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.81 in. (55.88 cm)
Wetted Parts, pump and hose . . . . . . . . . . . . . . . . . . . . stainless steel, brass, leather, ultra-high molecular
weight polyethylene (UHMWPE), carbide, nylon, alumi-
num, PVC, polypropylene, fluroelastomer
Wetted Parts, gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum, brass, carbide, nylon, plated steel, stainless
steel, UHMWPE, zinc
Storage Temperature Range ◆❖ . . . . . . . . . . . . . . . . . . -30°F - 160°F (-35°C - 71°C)
Operating Temperature Range ✔ . . . . . . . . . . . . . . . . . 40°F - 115°F (4°C - 46°C)
◆
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.