Alinco DJ-C7 - Manual (Page 15)

15
4
Basic
O
perations
4.5 VFO Mode
This is the mode which is set as the factory-shipped
configuration.
Radio frequencies and various settings can be changed by
rotating the dial in this mode.
■Switching the Band
Every time you press the key, the 7 bands listed below
can be switched in order.
■1 MHz UP/DOWN
When you rotate the dial with holding the key down, you
can increase or decrease a frequency by a 1MHz-step in
accordance with the direction of dial rotation.
This function is a quick way to increase or decrease the
frequency by a large amount.
After pressing the key, releasing it without any dial
operations can switch among bands.
■Entry Completion Digit for Different Tuning Steps
The tuning step can be changed. You may choose one of the
selections as follows:
Auto, 5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, 200 kHz.
1. Press the key to select the band to change its
tuning step.
2. Press the key, and press the MONI key when you
see the icon appears on the LCD.
3. Rotate the dial to choose a tuning step as you desire.
4. Press the PTT key to complete the setting and to
return to the operating mode.
The default tuning step is set to "Auto".
Choosing any tuning step but "Auto" in any of the bands
releases the default setting to "Auto" in all provided band
selections, and the last selected tuning step for a specified
band is programmed.
Returning the setting to "Auto" in a specified band, all tuning
steps for all provided bands will be returned to "Auto".
"Auto" uses tuning steps and modes which are programmed
into the DJ-C7 at the factory.
Default VHF
L-UHF
H-UHF
FM Radio
Air Band
DJ-C7T: 145.000 (142.000-173.995MHz)
DJ-C7E: 145.000 (144.000-145.995MHz)
DJ-C7T: 380.000 (380.000-419.995MHz)
DJ-C7T: 445.000 (420.000-511.995MHz)
DJ-C7E: 433.000 (430.000-439.995MHz)
DJ-C7T: 88.100 (88.100-107.995MHz)
DJ-C7E: 87.500 (87.500-107.995MHz)
DJ-C7T: 118.000 (108.000-141.995MHz)
FM
FM
FM
WFM
AM/FM