Alinco DJ-C7 - Manual (Page 30)

30
8
Maintenance
and
Reference
8.2 Resetting
When you reset the transceiver, all settings are returned to the
initial (default) factory setting. You can reset programmed
channel memory when the write protect is off.
1. Press and hold the key and press the key
to turn the power on.
2. Release the keys when all icons are displayed.
The transceiver returns to the initial VFO mode.
●Factory Setting
• VFO Frequency VHF :145.000MHz
L-UHF :380.000MHz (T version)
UHF :445.000MHz (T version)
UHF :433.000MHz (E version)
FM Radio :88.100MHz (T version)
FM Radio :87.500MHz (E version)
Air
:118.000MHz (T version)
• Memory Channel 0 - 199ch blank
• Audio Volume 10
• Squelch Level 3
• Battery Save ON
• Scan Resume Condition Busy Scan
• Beep ON
• Tuning Step Auto
• Shift OFF
• Shift Range VHF :0.6MHz
UHF :5.0MHz
• Tone Squelch OFF
• Tone Frequency 88.5Hz
• APO, BELL OFF
8.3 Options
EME-24 Earphone microphone
EMS-60 Speaker microphone
EDH-32 Cigarette lighter cable
ESC-38 Soft case
EME-18 Earphone
EBP-58N Li-ion battery pack (DC3.7V 600mAh)
EDC-126/128 AC battery charger