AML M7225 Handheld Computer - Manual (Page 23)

M7225 User’s Guide
23
Chapter 3 – Using the Keypad
The M7225 Terminal is equipped with fifty-five keys that are divided into grey, black, blue, and green keys. When
pressed, each key emits an audible beep to indicate that the M7225 terminal has detected the key press.
System Control Keys
The key suspends and resumes the M7225 unit. During normal
operation, when the key is pressed once, the system will switch
to the low power suspend or “sleep” mode. Pressing again will
return the unit to the fully operational mode.
During normal operation, if the unit is idle for more than 30 seconds,
the LCD backlight will automatically dim to save battery power.
Pressing
the key will restore the backlight to the user definable
setting.
The button activates the M7225 scan engine. The button is
conveniently located for right or left hand use.
The top portion of the keypad consists
of four arrow keys and two Enter keys.
Func, Shift, Alt, & Ctrl
Pressing , , , or selects special functions of
each key as determined by
the current application. Pressing followed by a number key
selects the F-key of the same
number.
To toggle Caps Lock on or off, hold Func and press Shift.