Aquatic AV AQ-MP-5BT-H - Manual (Page 11)

5.2. AS/PS (Auto Scan/Preset Scan)
Scans through the current frequency band, and assigns presets to the radio stations that have the
strongest signal strength.
5.3 Local/Distant Tuning
When ‘Local’ is turned on the Media Player seeks to only the radio channels with strong signal
strength. When ‘Local’ is turned off the Media Player will seek to all radio channels it receives
signal from.
5.4 Stereo/Mono
Change the output mode between stereo and mono. Some applications only accept a mono input.
5.5 FM Tuning Area
The FM tuning can be set to different areas, using the rotary knob to scroll through to select the
desired tuning area.
There are seven different tuning areas: USA, EUR, LAT, ASIA, MIDDLE EAST, AUSTRALIA,
RUSSIA.
5.6 Beep Tone
Beep tone plays when any button is pressed, it can be toggled on and off from this selection.
5.7 System Reset
Restores all factory settings.
Only does this for one AM/FM band at a time.
When local is turned on the word ‘Local’ will appear in the upper right hand corner of the Media Player LCD.
5.1 Audio Menu
From the ‘Audio Menu’ you are able to change the bass, treble, balance, and fader.
Any changes made in the ‘Audio Menu’ are system wide so it will affect all modes.
1. To enter the ‘Audio Menu’ press the ‘AUDIO/MENU’ button.
2. In the ‘Audio Menu’ press the ‘AUDIO/MENU’ button to scroll through all options.
3. To change the parameters use the rotary knob to adjust settings.
Settings Operation
Media Player AQ-MP-5BT-H
11 www.aquaticav.com