Aquatic AV AQ-DVD-4 - Manual (Page 12)

29
www.aquaticav.com
iPOD & iPHONE OPERATION
A
Q
-D
V
D
-4
IPOD/IPHONE CHARGING
While connected to the unit the iPod/iPhone will automatically start re-charging,
so long as the AQ-DVD-4 has power ON.
DISPLAY IPOD/IPHONE INFO ON LCD
The AQ-DVD-4 unit can display the Song, Artist, Album name and elapsed time on the LCD
display during iPod/iPhone playback.
SEARCHING IPOD/IPHONE
In the iPod/iPhone playback mode press BAND to enter into the iPod/iPhone NAVI
searching mode
Use the VOLUME+/- buttons to navigate and press the ENTER button to enter iPod/iPhone
search methods as below:
1) Playlists
2) Artists
3) Albums
4) Genres
5) Songs
6) Composers
7) Audiobooks
8) Podcasts
Once the desired searching method is highlighted, and within 20 seconds, press the
ENTER button to confirm and enter the chosen search mode.
Press the VOLUME+/- buttons to navigate through the Albums, Artists, Songs etc contained
in the iPod/iPhone.
Press the ENTER button to confirm and play the selected song
During the searching mode press BAND to move back to the last upper level of Albums,
Playlists, Genres etc.
SKIP SONGS
Short press the TRACK UP or TRACK DOWN buttons to skip to the next or previ-
ous song on the iPod/iPhone.
FAST FORWARD / FAST REVERSE
Press and hold Press the TRACK UP or TRACK DOWN button for more than 2
seconds to fast forward or fast reverse through the song.
SETTINGS OPERATION
DESCRIPTION OF SETTING FUNCTIONS
VOL PGM
Allows volume level to be set when the unit is turned on. VOL PGM 20 is the default setting.
Press the VOLUME +/- buttons to set to the desired VOL PGM level.
If in normal operation the volume is set louder than the VOL PGM value, the unit will revert
back to the set VOL PGM level when the unit is next turned on. If in normal operation the
volume is set lower than the VOL PGM value, the unit will maintain this level when next
turned on. Maximum VOL PGM level is 23.
LOC/DIST
Press the VOLUME +/- buttons to select LOCAL or DISTANCE mode. This feature is used
to determine the strength of the signals at which the tuner will lock on to during automatic
tuning. DISTANCE is the default setting, allowing the radio to tune into a broader range of
signals. To set the unit to select only strong local stations press the volume+/- button until
LOCAL appears in the display.
STEREO/MONO
STEREO is the default setting. User now has 5 seconds to adjust it from STEREO to
MONO by using SETTINGS OPERATION VOLUME+/- key.
AREA
“USA” is the default setting. User now has 5 seconds to select “USA” to “EUROPE” by
pressing the VOLUME+/-.
BEEP TONE
ON is the default setting. User now has 5 seconds to adjust from ON to OFF by pressing
the VOLUME+/- buttons.
CONTRAST
CONTRAST 5 is the default setting. The user has 5 seconds to change it from 0-10 by
pressing the VOLUME+/- buttons.
DIMMER
The dimmer feature of the display is set to DIMMER HIGH by default. User can use the
VOLUME+/- buttons to adjust it to High, Middle or Low.
LOW BATTERY ALARM
LOW BATTERY OFF is the default setting. User now has 5 seconds to use the VOLUME+/-
buttons to adjust it from OFF to ON.
If LOW BATTERY ON is selected the alarm unit will sound a beep tone over the speaker
output. The visual warning “LOW BATT” message will be displayed on the LCD. If selected
LOW BATTERY OFF no alert will be sounded and the “LOW BATT” message will not be dis-
played when in low voltage state.
DESCRIPTION OF SETTINGS FUNCTIONS
12
www.aquaticav.com
AQDVD4 Manual_V1.4_FINALV1:Layout 1 10/11/2011 20:13 Page 23