Aquatic AV AQ-DVD-4 - Manual (Page 23)

23
www.aquaticav.com
MP3/WMA OPERATION
A
Q
-D
V
D
-4
PLAYING & CONTROLLING MP3/WMA FILES
TRACK SELECT or
The player plays the first track automatically. When the track is finished the second track will
begin playing and the displayed track number will be updated.
Press the TRACK UP or TRACK DOWN button for less than one second to skip to
the next or previous track on the CD. The selected track number will appear on the display.
Press and hold Press the TRACK UP or TRACK DOWN button for 2 seconds to
fast forward or fast reverse through the disc.
PAUSE/PLAY BUTTON
Press to pause playback. Press again to resume normal playback.
FAST FORWARD & FAST REVERSE or
Press FAST FORWARD to fast forward through the disc. Each time the button is
pressed a new speed (2X,4X,8X or 20X) is selected.
Press PLAY to resume normal playback.
Press FAST REVERSE to fast reverse through the disc. Each time the button is
pressed a new speed(2X,4X,8X or 20X) is selected.
Press PLAY to resume normal playback.
REPEAT PLAYBACK BUTTON
Press RPT button to active the repeat function. The current song will be repeatly
played.
Press RPT again to active the REPEAT DIR function. All files in the current folder will
be played repeatly.
Press RPT a third time to disable the repeat function.
PREVIEW/INTRO BUTTON
Short press INT button to play first ten seconds of each file in the current folder and
“INTRO DIR” will appear on the LCD.
Press INT button for a second time to play first ten seconds of each file and “INTRO
ALL” will appear on the LCD.
Press INT button for a third time to exit intro mode.
TUNER OPERATION
FM BAND OPERATION
TUNING UP / DOWN
USING & STORING PRESET STATIONS
STEREO / MONO TUNER OPERATION
Press BAND to change between FM bands and AM (MW) bands. The reception band
will change in the following order:
FM1--FM2--FM3--AM1(MW1) --AM2(MW2)
MANUAL TUNING
Press and hold the TUNING up or TUNING down button for more than 3 seconds to
active the manual tuning mode. The radio frequency will tune up or down rapidly and will
stop when you released the button. If buttons have not been pressed for 5 seconds, it will
return to Auto Seek tuning mode
AUTO SEEK TUNING
Short press the TUNING up or down buttons to seek the next station automatically.
Six numbered buttons store and recall stations for each band
AUTO STORE (AS)
Select a band (if needed). Press and hold AS/PS button for 3 seconds. It will select 6
strong stations and store them in the current band automatically.
PRESET SCAN (PS)
Scan stations stored in the current band. Select a band (if needed). Short press AS/PS
button. The unit will scan and listen to each preset station for 5 seconds.
Press AS/PS button again to stop scanning when the desired station is found.
STEREO
The unit will automatically pick up a stereo signal when available. When in stereo mode, the
“ST” icon appears on the LCD. When no stereo signal is available the unit will automatically
revert to mono operation and “ST” icon will not be displayed.
MONO
When you select the MONO mode the unit will output MONO a signal.
Select MONO mode to reduce noise if the radio signal is weak.
18
www.aquaticav.com
AQDVD4 Manual_V1.4_FINALV1:Layout 1 10/11/2011 20:13 Page 35