ARAG Skipper LT - Satellite Navigator - Manual (Page 5)

5
4 installation
4.1 Introduction
Installation of the SKIPPER LT system does not require specialist knowledge.
We recommend however that this be done by a qualified technician in as much as the installation
also requires electrical connections to be made.
ARAG IS NOT LIABLE FOR ANY DAMAGE CONSEQUENT ON INSTALLATION BY
UNQUALIFIED PERSONS.
IF CASE OF DAMAGE TO THE SYSTEM CAUSED BY INCORRECT INSTALLATION OR
CONNECTIONS, THE WARRANTY IS AUTOMATICALLY VOIDED.
CAUTION! DO NOT CONNECT ANY ANTENNA DIFFERING FROM THE RECOMMEN-
DED ONE (art. no. 520110.600).
ARAG WILL BE HELD HARMLESS FROM ANY LIABILITY IN CASE OF PRODUCT
DAMAGES, FAULTS AND RISKS OF ANY KIND CAUSED BY THE CONNECTION OF
THE MODULE WITH NON-ORIGINAL ANTENNAS OR ANTENNAS NOT SUPPLIED BY
ARAG.
4.2 System configuration
B
C
A
+
D
12 Vdc
Fig. 2
Legend:
a SKIPPER LT satellite navigator
B GPS antenna
c Battery
d Treatment status signal +12 Vdc
(from main control valve)