ARAG Skipper LT - Satellite Navigator - Manual (Page 9)

9
Antenna fastening:
The antenna has a magnetic base and should be positioned on a flat metal surface (e.g. farm ma-
chine roof). In case of plastic roof, use the supplied metal plate and sticker.
Remove one of the protective films from the sticker and stick it onto the metal plate. Then remove
the other protective film and position the plate where the antenna is being fitted after cleaning the
whole area.
It is important that the metal plate and the antenna are positioned onto a flat surface
free from any objects which might reduce adhesive adherence.
metal plate
sticker
Check for proper metal plate fixing at regular intervals so to avoid its accidental
detachment.
Fig. 9