Servicing – Archgard 3600-DVTR24N User Manual
Page 36
Optima 3600 –1
36
If any of the major gas components need to be replaced, such as the pilot or the gas valve, we
recommend replacing the complete gas component assembly. The assembly is designed to be quickly
and easily replaced with minimal inconvenience to the customer. Once replaced, the service technician
can repair the defective assembly safely and comfortably in his shop and with the right tools and test
equipment. We encourage our authorized dealers to keep a few replacement gas component assemblies
at hand for quick servicing.
Replacing Gas Component Assembly
❖
Disconnect electricity to the appliance.
❖
Shut off the gas supply to the appliance and disconnect the gas line to the appliance.
❖
Remove the glass door, logs, coals and burner.
❖
Disconnect the two wires at the front of the valve from the on/off switch.
❖
Remove the fan speed control (rheostat) from the control panel.
❖
Remove the screws holding the gas component assembly to the appliance firebox bottom.
❖
Gently lift the assembly out and remove through the front.
❖
Replacing the assembly is the reverse of the above instructions.
* Check the tray sealing gasket. Replace if damaged.
Please refer to instruction sheet included with the Conversion Kit. Part # CK-LP-3600
FUEL CONVERSION PROCEDURE
REPLACING MAJOR GAS COMPONENTS
SERVICING