Archgard 60-1600I - Manual (Page 22)

Chalet 1600I 22
IF YOUR GLASS BREAKS
See your dealer for the exact replacement glass. Replace with 5mm ceramic glass only. The gasket around the
glass must be replaced with the identical gasket - see your Archgard Dealer. Ensure that the fire is out and the insert is
cool to the touch.
1. Protect your work surface with padding or towels.
2. Remove the door from the insert by lifting it up and off the hinges.
3. Lay door face down on your work surface making sure the handle hangs over the edge so the door lays flat on a soft
surface.
4. Remove the 8 bolts holding the glass retainer to the door and remove the glass.
5. Install the new glass and new gasket into the opening and replace the glass retainer being careful not to cross-
thread or over-tighten the bolts.
6. Replace the door on the appliance.
PAINT
You may touch up the ARCHGARD CHALET 1600I Wood Fireplace Insert with STOVE BRIGHT high temperature
paint. The correct paint is available from your dealer. When you paint the insert, remove the gold items (i.e., door), and
cover the area surrounding the fireplace with newspaper. Follow the directions outlined on the spray can. DO NOT at-
tempt to paint while the insert is still warm. Keep the spray can away from any source of heat or open flame. Ensure
that there is adequate ventilation in the room from the time you start painting until the paint is dry.
PLATED DOORS
If you have gold or nickel plated doors you will be happy to know that they will not tarnish, however they are not scratch
resistant. They require a totally abrasive free cleaner. Use only mild soap and warm water or denatured alcohol to
clean the gold or nickel when the surface is cool. The use of any household cleaner, such as Windex, abrasive clean-
ers, or any form of acid, may permanently etch or remove some of the gold or nickel plating. Before every fire, be abso-
lutely sure to wipe off all fingerprints from the gold or nickel plating. Acid from debris or even your fingerprints may per-
manently etch the gold or nickel plating and void the warranty.