ARM Electronics C9TMX - Manual (Page 24)

24
selected motion detect area.
“OFF”: invisible the motion detect area for each channel, but the motion
detect function is still enable.
If you select this “OFF” state, the screen will disappear both the grids of the
motion detect , and the selected motion detect area.
SENSITIVITY: The motion detection sensitivity means that motion detection is
determinated on depending quantity of motion area change. So user can set
the value as the threshold of motion detection.
“HIGH”: This setting is most sensitive motion detection, because this setting
is the lowest quantity of motion area change.
“MEDIUM”: This setting is lowest sensitive motion detection, because this
setting is the medium quantity of motion area change.
“LOW”: This setting is most sensitive motion detection, because this setting
is the highest quantity of motion area change.
MOVING VELOCITY: The motion detection velocity means that motion detection
is determinated depending on velocity of motion area change.
“HIGH”: This setting is the shortest comparison interval.
“MEDIUM”: This setting is the medium comparison interval.
“LOW”: This setting is the longest comparison interval.
MOTION AREA: In this page, user can select a motion area and change the state
(active/non-active). User can use the direction key to move to the position
user want to set.
There are 5 colors represent the state:
Purple color: represents that the unit of block has a motion detection.
Green color: represents that the unit of block is ready for detecting motion
activities.
Transparent: represents that the unit of block is unable to detect any motion
activities.
Cursor in red color: represents that the unit of block behind the Cursor of is
ready for detecting motion activities.
Cursor in blue color: represents that the unit of block behind the cursor is
unable to detect any motion activities.