ATL Telecom Berkshire MR51 - Manual (Page 13)

ATL
Telecom
Berkshire MR51 & 61 User Guide
02/01/03 Page 13 of 25
Centrex / PABX switch access digit (usually 9). This may also be
followed by as many one second pauses as are necessary. Pauses are
inserted by pressing the (VOICE-MAIL) button once for each second.
It will also be necessary to program a second memory location for the
purpose of call diversion to voicemail. For most systems this will require
entering the same voicemail number again. However, there are other
systems such as BT Featureline, that require a different number be
entered for calls diverted to Voicemail.
(‚), (Set), (DIVERT), (VOICE-MAIL), enter number , (Set)
Pressing the (VOICE-MAIL) button allows you to call the voice-mail
service at a single touch. Your telephone company may indicate the
presence of un-read messages for you by special interrupted dial-tone,
or (where CLI is available from the exchange) by flashing the 'Msg.
Wtg.' light and displaying MESSAGE .
When you want to divert your incoming calls to your voice-mail, just
press the (DIVERT) button and select DIVERT ALL , DIVERT BUSY or
DIV NO RPLY in the display, then press (VOICE-MAIL) button.