ATL Telecom Berkshire MR51 User Manual
Page 3
ATL
Telecom
Berkshire MR51 & 61 User Guide
02/01/03
Page 3 of 25
COMPLIANCE NOTES
The Berkshire MR51 and MR61 may only be connected to the following
types of installations:
§
Connect to a standard BT master or slave socket.
§
Direct Exchange Lines.
§
Private Automatic Branch Exchanges (PABX).
§
Centrex lines.
Disclaimer
The information contained in this document is supplied without liability
for errors or omissions. ATL Telecom Limited reserves the right to make
changes to this document at any time without notice.
Power Rating Information – AC Plug Top Adapter
§
Input: 230V~240V.@ 25mA ,50Hz.
§
Output: 9V@100mA
Safety Statement
The connecting plug at the end of the line cord, the data and headset
ports meet the requirements of the Telecommunications Network
Voltage (TNV3) as specified in BS EN 60950:2000. The plug top power
supply dc input jack meets the requirements of the Telecom Network
Voltage (TNV1) as specified in BS EN 60950:2000.
The plug top power supply serves as the disconnect device, therefore a
socket outlet shall be installed near the equipment and shall be easily
accessible. Disconnect the line cord before attempting to remove the
plug top power supply dc input jack.
Manufacturers Declaration*
ATL Telecom Limited declares that this product is in
conformity with the essential requirements of the ‘R&TTE
directive 1999/5/EC’.
* A copy of the Declaration of Conformity is available upon request
from ATL Telecom Ltd.