Epson DS500 - Manual (Page 17)

English
15
2. Select Unit Settings from the MOBILELOCK TM menu.
3. If you have more than one MOBILELOCK you will be asked to
select the correct one, the correct group or all.
4. Select Speaker Settings .
5. Select Paging .
6. If you have not located the MOBILELOCK TM unit, you can initi-
ate the paging again.
TO INITIATE PAGING VIA MOBILELOCK TM WEBSITE
1. Go online to www.dewalt.com/mobilelock and enter login and
password.
2. Select Unit Customization.
3. If you have more than one MOBILELOCK TM unit, you will be
asked to select the correct one.
4. Select Page.
5. If you have not located the MOBILELOCK TM unit, you can initi-
ate the paging again.
The MOBILELOCK TM unit has several customizable features. See
the MOBILELOCK TM website for up-to-date information about all of
the customizable features. Many of these features are prepro-
grammed to the most common settings. Before use, understand
the default settings.
NOTE: The MOBILELOCK
TM website and phone menu is subject
to change.
Grouping
To make for simple arming and disarming of several
MOBILELOCK
TM units on several sites, group them together.
Nicknames
To avoid using the electronic serial number as the descriptor,
MORE FEATURES & OPTIONS
nicknames can be used for both the MOBILELOCK TM website and
the phone menu system. Record the nicknames on the phone
menu system and that same recording will be used during alarm
notification.
Change Contact Information
The MOBILELOCK TM notification service will contact up to three
people in the event of an alarm. If the first person is not available
or chooses not to act upon the alarm (on vacation, etc) the notifica-
tion service will call the next user on the list. Low battery notifica-
tion and full battery notification will provide reminders of required
maintenance.
Change Password
The passwords for both the MOBILELOCK TM website and phone
menu system are the same. The password can be changed either
on the website or through the phone menu system.
Change Speaker Settings
There are several speaker settings. They are all user-adjustable.
The alarm siren can be silenced. The confirmation chirp on arming
and disarming can also be activated or silenced.
Battery Maintenance
DS500
The MOBILELOCK
TM unit will not function without power. The unit
has a rechargeable battery. If the battery has not been adequately
charged, the product will not operate. Several factors such as
cellular signal strength, number of location requests, number of
alarms, and other activities affect the battery run-time.
For additional runtime, the DS505 Extended Run-Time Adapter can
be used.
DS500 E,Sp 8/9/06 11:04 AM Page 15