Ensemble Designs BrightEye 55 Genlockable Sync Generator and Test Signal Generator User Manual
Page 14
Advertising
BrightEye 55 Genlockable SPG/TSG
BrightEye 55 - Page 14
Genlock Menu
Use the Genlock menu shown below to set the following parameters:
• Reference – The type of external reference connected to the Ref In BNC
will be reported as
No Ref, 525 Reference, or 625 Reference.
• Ver Time – set the output timing of all output signals to match the vertical
timing in relation to the external reference connected to the
Ref In BNC
in lines.
• Hor Time – set the output timing of all output signals to match the hori-
zontal timing in relation to the external reference connected to the
Ref In
BNC in clocks.
Advertising