Ensemble Designs BrightEye 55 Genlockable Sync Generator and Test Signal Generator - Manual (Page 17)

TM
BrightEye 55
BrightEye 55 - Page 17
SPECIFICATIONS
Reference Input
Number One
Signal Type 1V P-P PAL, NTSC, or 10 MHz
Return Loss >40 dB DC to 5.5 MHz
Composite Output
Number One
Signal Type NTSC / PAL
Impedance 75 1
Return Loss >40 dB DC to 5.5 MHz
Frequency Response -0.1 dB 10 KHz to 5.0 MHz
Output DC ± 50 mV
K Factors < 1.0%
Differential Phase < 1.0 degree
SCH Phase ± 5 degrees
Accuracy and Timing Stability
Internal TCX0
PAL Fsc
4.43361875 MHz +/- 1 Hz
NTSC Fsc 3.579545 MHz +/- 1 Hz
601 Fs 27.000000 MHz +/- 5 Hz
Long Term Drift <1 ppm/year
Analog Jitter <1 ns
Digital Jitter <0.2 UI (0.13 UI typical)
Serial Digital Output
Number
One
Signal Type SMPTE 259M
Return Loss > 15 dB to 270 MHz
Tri Level Sync Output
Number One, 75 1
Type 1080i (SMPTE 274M -5, 6) 59.94, 50, 60 Hz
720p (SMPTE 296M -2, 3) 59.94, 50, 60 Hz
1080p (SMPTE 274M -9, 11) 23.98, 24, 25 Hz
1080sF (RP211 -14, 16) 23.98, 24, 25 Hz
Output DC ± 50 mV
Return Los > 30 dB to 30 MHz
AES Output:
Number One
Type AES3id, 1 KHz tone
Resolution 24 bit