Powering on the switch – H3C Technologies H3C S12500 Series Switches User Manual
Page 17
Advertising
14
Figure 19 Connecting the console cable
Powering on the switch
Verify that the power cord is connected to the power source, power on the switch, and verify that the LEDs
on the switch are normal.
Table 2 LED description when the switch is operating correctly
Module LED
Status
MPU
SFC (red/green)
Flashing green
LC (red/green)
Flashing green
FAN (red/green)
Flashing green
PWR (red/green)
Flashing green
RUN (red/green)
Flashing green
Ethernet interface card
RUN (red/green)
Flashing green
Switching fabric module RUN (red/green)
Flashing green
Advertising