H3C Technologies H3C S12500 Series Switches User Manual
Page 34
28
Model Connector
Optical parameters
Transmit power
Receive power
QSFP-40G-SR4-MM850-N
DDM
MPO (PC polished, 12-fiber) –7.6 dBm to 0 dBm
–9.5 dBm to +2.4 dBm
QSFP-40G-CSR4-MM850
MPO (PC polished, 12-fiber) –7.6 dBm to 0 dBm
–9.9 dBm to +2.4 dBm
QSFP-40G-CSR4-MM850-
NDDM
MPO (PC polished, 12-fiber) –7.6 dBm to 0 dBm
–9.9 dBm to +2.4 dBm
QSFP-40G-IR4-PSM1310
MPO (APC polished,
12-fiber)
–11.5 dBm to +0.5
dBm
–9.2 dBm to +0.5 dBm
QSFP-40G-LR4-PSM1310
MPO (APC polished,
12-fiber)
–14.4 dBm to +0.5
dBm
–8.2 dBm to +0.5 dBm
NOTE:
The 40G QSFP+ ports of the QSFP-40G-SR4-MM850, QSFP-40G-SR4-MM850-NDDM,
QSFP-40G-CSR4-MM850, QSFP-40G-CSR4-MM850-NDDM, QSFP-40G-IR4-PSM1310 and
QSFP-40G-LR4-PSM1310 fiber transceiver modules can be split into four channels. You can connect a
40G QSFP+ port to four 10G SFP+ ports. The QSFP+ fiber transceiver module and SFP+ fiber transceiver
modules to be connected must be the same in specifications, including central wavelength and fiber type.
QSFP+ fiber transceiver modules that use LC
connectors
Figure 19 QSFP+ fiber transceiver module that uses LC connectors