H3C Technologies H3C S10500 Series Switches - Manual (Page 15)

8
Step Command Remarks
2. Enter S-channel interface
view. interface s-channel
interface-number:channel-id
N/A
3. (Optional.) Configure the
expected bandwidth of the
S-channel interface.
bandwidth bandwidth-value
By default, the expected
bandwidth of an S-channel
interface is the default maximum
bandwidth of the physical port to
which the S-channel interface
belongs.
4. (Optional.) Restore the default
settings for the S-channel
interface.
default N/A
5. (Optional.) Configure a
description for the S-channel
interface.
description text
The default description information
is "interface name Interface."
6. Bring up the S-channel
interface.
undo shutdown
By default, the S-channel interface
is up.
To configure an S-channel aggregate interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter S-channel aggregate
interface view. interface schannel-aggregation
interface-number:channel-id
N/A
3. (Optional.) Configure a
description for the S-channel
aggregate interface.
description text
The default description information
is "interface name Interface."
4. Bring up the S-channel
aggregate interface.
undo shutdown
By default, the S-channel aggregate
interface is up.
Configuring the RR mode for an S-channel
EVB TLVs exchanged through LLDP allow an EVB station and EVB bridge to negotiate the use of reflective
relay. If the EVB bridge supports the RR mode, when the EVB station requests the use of the RR mode, the
bridge performs the following tasks:
• Automatically enables the RR mode for the S-channel.
• Saves the configuration in the configuration file on the bridge.
You can also manually enable the RR mode for an S-channel by performing this task.
To configure the RR mode for an S-channel:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter S-channel interface
view or S-channel aggregate
interface view.
interface { s-channel |
schannel-aggregation }
interface-number:channel-id
N/A