Fip-310 combo interface specifications, Fip-310 10 gbps ethernet port specifications – H3C Technologies H3C SR6600-X User Manual

Page 120

Advertising
background image

110

Item Remarks

Hot swapping

Supported

NOTE:

For a combo interface, the default operating port is the copper port. You can use either the copper port
or the fiber port. To switch between the copper and fiber ports, use the combo enable { copper | fiber }
command in interface view. For more information about the combo enable { copper | fiber } command,

see

H3C SR6600/SR6600-X Routers Interface Command Reference.

Use transceiver modules for the fiber ports provided by H3C only. The router might be incompatible with
transceiver modules from other manufacturers. The system generates an alarm when a transceiver
module from another manufacturer is installed.

FIP-310 combo interface specifications

Specification of combo interfaces on the FIP-310 is the same as FIP-110. For more information, see

Table

33

and

Table 34

.

Transceiver modules for the FIP-310 are the same as the FIP-110. For more information, see

Table 35

.

FIP-310 10 Gbps Ethernet port specifications

Table 36 FIP-310 10 Gbps Ethernet port specifications

Specification Description

Connector type

LC

Transceiver module type

SFP+

Interface standards

802.3ae

Transmission
power

Type

Short-haul

multi-mode
(850 nm)

Mid-haul

single-mode
(1310 nm)

Long haul
(1310 nm)

Long haul
(1550 nm)

Super long

haul (1550
nm)

Minimum

–7.3 dBm

–6.5 dBm

–8.2 dBm

–4.7 dBm

0 dBm

Maximum

–1 dBm

0.5 dBm

0.5 dBm

4 dBm

4 dBm

Receive sensitivity

–7.5 dBm

–6.5 dBm

–10.3 dBm

–11.3 dBm

–24 dBm

Central wavelength

850 nm

1310 nm

1310 nm

1550 nm

1550 nm

Fiber type

50/125 μm
and
65.5/125

μm

multi-mode
fiber

50/125 μm
and

65.5/125 μm
multi-mode

fiber

9/125 μm
single-mode
fiber

9/125 μm
single-mode
fiber

9/125 μm
single-mode
fiber

Operating mode

10 Gbps (full duplex)

Transceiver modules available for the FIP-310 10 Gbps Ethernet port

Transceiver module

Central

wavelength Connector Fiber

specifications

Max transmission

distance

SFP-XG-SX-MM850-A 850

nm LC

50/125

μm, multi-mode

300 m (984.25 ft)

SFP-XG-LX-SM1310 1310

nm LC

9/125

μm, single mode

10 km (6.21 miles)

Advertising