H3C Technologies H3C SecPath F5020 - Manual (Page 40)

31
[Sysname] interface route-aggregation 3
[Sysname-Route-Aggregation3] quit
# Add GigabitEthernet 1/0/1 and GigabitEthernet 2/0/1 to aggregation group 3
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-aggregation group 3
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] port link-aggregation group 3
[Sysname-GigabitEthernet2/0/1] quit
# Enable BFD MAD on the aggregate interface.
[Sysname] interface route-aggregation 3
[Sysname-Route-Aggregation3] mad bfd enable
# Configure a MAD IP address for each member device on the aggregate interface.
[Sysname-Route-Aggregation3] mad ip address 192.168.2.1 24 member 1
[Sysname-Route-Aggregation3] mad ip address 192.168.2.2 24 member 2
[Sysname-Route-Aggregation3] quit