H3C Technologies H3C SecBlade FW Cards - Manual (Page 17)

10
Figure 7 Static NAT configuration page
Figure 8 Add Static Address Mapping page
Table 6 Static NAT configuration item
Item Description
VPN Instance Specify a VPN instance name.
Internal IP Address Type an internal IP address for the static address mapping.
Global IP Address Type a public IP address for the static address mapping.
Network Mask
Specify the network mask for internal and public IP addresses.
If the network mask is specified, net-to-net static NAT is implemented. If no
network mask is specified, the default mask 255.255.255.255 is used. In this
case, one-to-one static NAT is delivered.
Return to Static NAT configuration task list .