H3C Technologies H3C SecBlade FW Cards - Manual (Page 3)

Preface
The H3C SecPath series high-end firewalls configuration guides describe the software features, the
software configuration procedures, and the configuration examples for the H3C SecPath series firewalls
and the SecBlade series firewall modules.
The NAT and ALG Configuration Guide describes how to configure NAT and application layer gateway.
This preface includes:
• Audience
• Conventions
• About the H3C SecPath series high-end firewalls documentation set
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the H3C high-end firewall products
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.