H3C Technologies H3C SecBlade FW Cards - Manual (Page 18)

11
Enabling static NAT on an interface
Select Firewall > NAT Policy > Static NAT from the navigation tree to enter the page shown in Figure 7 .
In the Interface Static Translation field where static NAT entries configured for interfaces are displayed,
click Add to enter the Enable Interface Static Translation page shown in Figure 9 .
Figure 9 Enable Interface Static Translation page
Table 7 Interface static NAT configuration items
Item Description
Interface Name Select an interface to which static NAT is applied.
Enable track to VRRP
Configure whether to associate static NAT on an interface with a VRRP group,
and specify the VRRP group to be associated if you associate static NAT on an
interface with a VRRP group.
When two network devices implement both stateful failover and dynamic NAT,
you need to add the devices to the same VRRP group, and associate dynamic
NAT with the VRRP group to ensure normal switchovers between the two
devices.
VRRP Group
Return to Static NAT configuration task list .
Creating an internal server
Select Firewall > NAT Policy > Internal Server from the navigation tree to enter the page shown in Figure
10 . In the Internal Server field where all internal server information is displayed, click Add to enter the
Add Internal Server page shown in Figure 11 .