Grass Valley 2000NET v3.2.2 - Manual (Page 34)

34 2000NET Instruction Manual
Using the 2000NET GUI
2000NET Configuration Web Page
The 2000NET Configuration web page provides the following:
• A reboot button,
• SNMP Agent setup installation, and
• An Asset Tag identifier field.
Reboot Module
You may reboot the 2000NET module by selecting the reboot button at the
top of the page. A reboot can also be done on the 2000NET Network web
page.
SNMP Agent Installation
To use SNMP, the SNMP Agent software must be installed on the2000NET
module. The Configuration web page shown in
Figure 23 is displayed if the
agent software has not already been installed.
When SNMP Agent software is installed on the 2000NET module, enabled
status reports are sent to an SNMP Manager such as the Grass Valley’s Net-
Central application. Refer to
SNMP Monitoring on page 20 for more infor-
mation.
Figure 23. Configuring the 2000 Network Module for SNMP
Use
this
link