Grass Valley 2020DAC D-To-A - Manual (Page 19)

2020DAC Instruction Manual 13
Configuration and Adjustments
Module Configuration Displays
The 2000 GUI provides the following links and displays for the 2020DAC
module (
Figure 9 ):
■ Module Configuration displays showing status and slot configuration
information (location and user-assigned names),
■ Ch 1/2 and Ch 3/4 Input Status/Output Mode displays, and
■ Software Update display.
The Module Configuration displays operate in the same manner for all
remote controllable 2000 modules. Refer to the 2000NET manual for more
information on these displays. Some functions listed may not be supported
by a particular module. These will be indicated as not supported.
Figure 9. 2020DAC Display Links
Software Update Display
The Software Update display allows you to download new software ver-
sions for the module. Refer to the 2000NET manual and the Grass Valley
Group web site at http://www.grassvalleygroup.com for complete details
and new software versions.
Ch 1/2 and Ch 3/4 Input Status/Output Mode Displays
This section discusses the Ch 1/2 and Ch 3/4 Input Status /Output Mode
displays available to set and monitor the 2020DAC module parameters
remotely.