Grass Valley 8920ADC v.2.0 - Manual (Page 22)

16 8920ADC Instruction Manual
8920ADC Analog Audio to AES/EBU Converter
User Settings
The User Settings menu allows you select the following parameters shown
in
Figure 9 :
■ Get Factory Default (Operation output mode to default, all audio levels
to 0 dB, and Monitor Audio Input mode to disabled).
■ Set Monitor Audio Inputs (Enabled or Disabled) to interact with the
main Status page to indicate the status of the audio inputs as shown
below.
Figure 9. 8920ADC User Settings Display
Use
This
Link
Enables or disables
audio input monitoring
on main Status page
shown below.
Returns module setting
to factory default settings.
When disabled, Input Signal(s)
display is grayed out as shown
in this Status page example.
When enabled, Input Signal(s)
display will be green if both signals
are >-20 dBFS, yellow if either of
the input signals is <-20 dBFS.