Grass Valley 8943RDA - Manual (Page 9)

8943RDA/-D/-DFR — Instruction Manual 9
8943RDA/-D/-DFR
SD/HD/3G-SDI Reclocking
DA Modules
Introduction
This manual covers installation, configuration, and operation of the
8943RDA, 8943RDA-D, and 8943RDA-DFR (Fiber Ready) SD/HD/3G-SDI
reclocking DAs supporting data rates up to 3Gb. All outputs are
non-inverting and will support DVB ASI outputs.
These modules install in a GeckoFlex frame with a front and rear module
for each model. All models require only one slot in the GeckoFlex frame.
The 8943RDA is an SD/HD/3G-SDI reclocking distribution amplifier pro-
viding one electrical input that can be output on eight reclocked outputs. It
can distribute SD/HD/3G-SDI video as well as DVB ASI formats, making
it ideal for mixed format installations or installations where an upgrade to
HD is planned. It requires the 89003E-R rear module.
The 8943RDA-D is a dual reclocking distribution amplifier with two elec-
trical inputs that can be assigned in configuration to any of four reclocked
output pairs. It can be used to distribute SD/HD/3G-SDI video and DVB
ASI format signals, making it ideal for mixed format applications or instal-
lations where an upgrade to HD is planned. It requires the 89003E-R rear
module.
The 8943RDA-DFR is a fiber-ready reclocking distribution amplifier pro-
viding two electrical inputs and three reclocked electrical output pairs plus
one single reclocked BNC. In addition, the module supports up to two fiber
optic inputs, two fiber optic outputs, or one fiber optic input and one
output when one of several different optional fiber optic submodules is
installed. Electrical and fiber optic inputs can all be active and outputs can
be mapped in any combination in configuration. This makes this model
ideal for receiving DVB ASI signals from distant downlinks or transmitting
them to remote uplinks. It requires the 89003FR-R rear module.