Grass Valley Aurora Browse v.6.5 Installation User Manual
Page 59
November 1, 2008
Aurora Browse Installation and Configuration Guide
59
Configure K2 MDI
6. Enter a stand-alone K2 Media Client or the K2 Media Client on a K2 Storage
System. (If shared storage, you can add the name of other servers.)
7. The default value on the Asset System Dwell Time is 120 seconds.
8. Click
Add
as a managed device.
The following settings enable transfers. You should add all available transfer targets,
as specified in
“Configuring transfer targets” on page 55
.
9. Under Transfer Servers, click
Add
.
10.Use the drop-down list to specify the MDI name.
11.Enter the Transfer Server for the MDI selected above.
12.Username:
movie
13.Leave the Password and Public Address fields blank.
14.To put changes into effect, start or restart K2 MDI service on the MDI Server.