Grass Valley DEC-1023 - Manual (Page 12)

GUIDE TO INSTALLATION AND OPERATION
8 | DEC-1023
3.5.1 The iControl graphic interface window
The basic window structure for the DEC-1023 is shown in figure 3.2. The window identification line gives the
card type (DEC-1023) and the slot number where the card installed in its Densité frame.
Figure 3.2 DEC-1023 iControl graphic interface window:
There are four main sections in the window itself, identified in figure 3.2:
1. The top section displays icons on the left. These icons report different statuses such as card
communication status, input signal and reference signal format and statuses. In some instances, they relate
to conditions defined through parameters settings.
Icon # 1 2 3 4 5 6 7
Move the mouse over an icon and a status message appears below the icon providing additional information.
If there is an error, the error status message appears in the message area without mouse-over.
• If there are multiple errors, the error messages cycle so all can be seen
• The icon whose status or error message is shown is highlighted with a mauve background
The table below lists the various status icons that can appear, and how they are to be interpreted.
• In cases where there is more than one possible interpretation, read the error message in the iControl
window to see which applies.
1
2
3
4