Grass Valley K2 Edge User Manual v.4.1 - Manual (Page 15)

K2 Edge User Manual - document version: 4.1 – Page 15
8.6 GPIO
Example.
Internal GPIO: DB9M
External GPIO: 410E

GPIO action: specify an action, for example GPI-5 switches to off
Use the pinning table to define conditionals for pins 1-8.

x: don't care (0 or 1)

0: low

1: high

Timecheat: check to enable cheat
type

None: results in no action

Script: runs a Linux shell script upon incoming GPIO commands, delayed by the configured delay
time if applicable.
Argument: script name preceded by the full path

Template: trigger a Composer template.
Argument: the template name which is configured in the channel pack

DB9M GPIO off: triggers a level on the specified GPIO bit, delayed by the configured delay
time if applicable.
Argument: GPI pin number

DB9M GPIO on: triggers a level on the specified GPIO bit, delayed by the configured delay time if
applicable.
Argument: GPI pin number

censor IO off: disables the censor on a SDI output port for the specified SDI port number
Argument: SDI port number (number only)

censor IO on: censors a SDI output port
Argument: SDI port number (number only)