Gpio via the ip manager – Grass Valley K2 Edge User Manual v.4.1 User Manual
Page 43
K2 Edge User Manual - document version: 4.1
– Page 43
16.2 GPIO via the IP Manager
Define GPIO events via the IP Manager web interface to trigger events or templates on the
K2Edge when a GPI is coming in.
Example.
IP Manager web interface > Channel Configuration > GPIO
GPIO action: specify an action, for example GPI-5 switches to off
Use the pinning table to define conditionals for pins 1-8.
x: don't care (0 or 1)
0: low
1: high
Timecheat: check to enable cheat
type
None: results in no action
Script: runs a Linux shell script upon incoming GPIO commands, delayed by the
configured delay time if applicable.
Argument: script name preceded by the full path
Template: trigger a Composer template.
Argument: the template name which is configured in the channel pack
DB9M GPIO off: triggers a level on the specified GPIO bit, delayed by the configured
delay time if applicable.
Argument: GPI pin number