Grass Valley K2 Edge Installation v.4.0.2 User Manual
K2 edge installation and service manual
Advertising
Table of contents
Document Outline
- 1 Grass Valley Product Support
- 2 Safety Summaries
- 3 About this document
- 4 Shipping kit contents
- 5 Credentials
- 6 Site preparation
- 7 K2 Edge Front Panel
- 8 K2 Edge Back Panel (connectors)
- 9 Indicators and status information
- 10 The IP Manager: introduction
- 11 Server installation and initial setup
- 11.1 Connecting the server to the LAN and connecting the IP Manager
- 11.2 Connecting the IOs
- 11.3 Connecting the VGA-monitor (optional)
- 11.4 Connecting blackburst, GPIO and LTC (optional)
- 11.5 Connecting the power cables and power on
- 11.6 Configuring the IP Manager
- 11.7 Configuring the K2 Edge hostname and network settings
- 11.8 Specifying the TX/MAM database IP-address
- 12 Channel Presets
- 13 Service Instructions
- 14 Appendix: The IP Manager Quick Reference
- 15 Appendix: time settings
- 16 Appendix: Changing an IP-address
- 17 Appendix: K2 Edge network ports
- 18 Appendix: K2 Edge IOs
- 19 Appendix: Supported input/output broadcast format combinations
- 20 Appendix: GPIO and LTC pinning
- 21 Appendix: Yast